Changchun New Industries Optoelectronics Technology Co., Ltd.
Lasers, Optics & Photonics

Products
Lasers
Spectrum Analyzers
Laser Application Systems
Laser Measurement Tools
Laser Marking
Fiber-Coupled Lasers & LEDs
Optics & Coatings
Laboratory Instruments
Components & Accessories
 
Components & Accessories
Laser Diode
Laser Optics
Optical Fiber
Beam Expander
AOM and Shutter
Multi-function Optical System
Variable Attenuator
Laser Goggles

<<More

 
Customer Service
TTL or Analog Modulation
Fiber Coupling
Coating Service
Laser Marking Service
Customized Products
 
Contact CNI
Tel: +86-431-85603799 / 89216078
Fax:    +86-431-87020258
E-mail:  [email protected]
國內: 0431-87020257 / 89216068
TTL or Analog Modulation

TTL or Analog Modulation

Our normal lasers have a continuous wave (CW) normal working mode. For modulation mode, there are 3 kinds of methods: direct intensity modulation (TTL or analog), AOM and shutter. The direct intensity modulation rate is available for 2 kHz, 5 kHz, 10 kHz, ...   30 kHz; AOM is with high modulation rate 1 MHz; Shutter is with repetition rate maximum 10 Hz. CNI is available for customized product on customers' requests.

◆Direct Intensity Modulation
    TTL modulation: Frequency is optional for 2 kHz, 5 kHz, 10 kHz...30 kHz upon request.
    Analog modulation: Frequency is optional for 2 kHz, 5 kHz, 10 kHz...30 kHz upon request.
                                    Voltage is optional for 0-5 volts DC input for regular products.
                                    Other choices are available upon requests, such as 0~4.5 volts DC, 1.0~4.5 volts DC and so on.
TTL modulation Ananlog modulation
TTL modulation Analog modulation

AOM (Acousto-optic Modulator)

AOM(Acousto-optic modulator)

It belongs to the high-speed acousto-optic pulse modulator which realizes the intensity modulation over the laser according to the inputted pulse signal and gets corresponding digitally coded optical signal by inputting the digital signal of different codes and frequencies (TTL level) into the driving power supply of modulator. It is mainly used in such fields as laser text-image processing and laser digital communication.

This product has such characteristics as quick modulation rate, small volume, high efficiency, high extinction ratio, easy coding and convenient use
. CNI can provide high frequency modulated DPSS lasers: single longitudinal mode lasers and high power stability lasers, wavelengths are available for 473nm, 532nm, 556nm, 561nm, 671nm, etc.


Shutter

Shutter

Low cost mechanical shutter, with repetition rate maximum 10 Hz. The valid output power is up to 3W available. The rise and fall time can be lower to 0.7 ms. Delay time is minimum 5 ms.
 
 Shutter

 

Addr: No.888 Jinhu Road High-tech Zone,Changchun 130103, P.R.China

Tel:+86-431-85603799     Fax:+86-431-87020258     E-mail: [email protected]

 
在線客服
在線客服系統
做街拍赚钱嘛 江西11选5走世图 股票配资平台怎么赚钱的 广西快十开奖结果查询 同花顺股票软件下载 甘肃快三专家推荐号 宁夏11选5走势图 吉林11选5前三直走势图表 新股申购一览表中签号 31联合36选7 郑州股票融资